WALTE power fuse series, fuses include WN10, WN20, WN30 and WN40 four series of more than ten signals, each model has unique parameter characteristics, can meet many circuit needs.
We can first look at the WN10 series of fuses, the current range from 200mA to 20A, the maximum voltage of 600VAC, breaking capacity of 600VAC/1000A. This fuse is suitable for those circuits that have certain requirements for current and voltage, and can quickly respond to abnormal situations such as overload or short circuit to protect circuit safety.
Next up is the WN20 series of fuses, which have improved the current range from 500mA to 20A, as well as a wider voltage range up to 600VAC/500VDC. Its breaking capacity is even more amazing 600VAC/200A and 500VDC/2000A.
Take a look at the WN30 series fuse, the fuse is similar to the WN10 series in the current, 200mA~20A, but the maximum voltage is 500VDC, breaking capacity is also up to 400VDC/2000A, this fuse is especially suitable for direct current circuit protection.
There are WN40 series fuses, this series of fuses is characterized by a relatively single current specification, 25A, but its voltage range is very wide, up to 300VAC/300VDC, breaking capacity of 300VAC/300A and 300VDC/300A, It is suitable for circuit protection that has specific requirements for current specifications and requires wide voltage adaptability.
The following is a brief introduction to the process manufacturing of WALTE power fuse series. WALTE fuses are made of advanced production technology and high-quality materials, with good conductivity and heat resistance. Abnormal fuse detection can cut off the current in time to prevent damage to electrical equipment and fire accidents. Not easy to aging and failure, to ensure the long-term safe and stable operation of the circuit.
