Current sensing resistor is a special type of resistor used to measure the current in a circuit. Its working principle is based on Ohm's law, that is, current is equal to voltage divided by resistance. By connecting a current sensing resistor in a circuit, we can indirectly measure the magnitude of the current by measuring the voltage passing through it.
Current sensing resistors play multiple roles in circuits. First, it can be used to measure the current and help us judge whether the circuit works normally. Secondly, it can serve as a current limiter in a circuit, limiting the magnitude of the current and protecting other components by adjusting the resistance value of the resistor. In addition, current sensing resistors can also be used in current protection devices. When the current exceeds the set value, it will generate a voltage signal, triggering the action of the protection device to protect the circuit and equipment.
When selecting models, we need to pay attention to some parameter characteristics. The first is the resistance value, usually measured in ohms (Ω). We need to select appropriate resistance values based on the current range in the circuit to ensure measurement accuracy. Next is the power dissipation capacity, in watts (W). We need to ensure that the current sensing resistor can withstand the power in the circuit, avoiding overload and damage. In addition, parameters such as temperature coefficient and frequency response need to be considered to ensure the stability and accuracy of current sensing resistors under different operating conditions.
In order to choose a good current sensing resistor, we can consider the following points. Firstly, determine the current range and accuracy requirements based on actual needs to determine the required resistance value and accuracy level. Secondly, understand the characteristics and performance of current sensing resistors of different brands and models, and compare their advantages and disadvantages. In addition, you can refer to the evaluations and experiences of other users to choose trusted brands and suppliers. Finally, it is recommended to conduct actual testing and verification before purchasing to ensure that the selected current sensing resistor meets the requirements.
The recommended brands of current sensing resistors are as follows: ELLON
Click on the image to enter the selection center
In summary, current sensing resistor is an important component for measuring current in a circuit, which can help us determine the working state of the circuit, limit the current size, and protect the circuit. When selecting a type, we need to consider parameter characteristics such as resistance value, power dissipation capacity, temperature coefficient, and select a suitable current sensing resistor based on actual needs. By understanding the principle and characteristics of current sensing resistors, we can better apply them and improve the performance and reliability of circuits.
