PRF21BE471QB5RA,MURATA,PTC Temperature Sensor

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

• USB4 noise reduction measures and verification solutions - practical operation Murata will provide a complete solution for USB noise reduction measures and verification from the following six aspects. 1. A brief history of USB. What noise issues may occur with USB4. 3. Noise reduction: How to apply CMCC is crucial (recommended CMCC products from Murata: NFG0QHB372HS2/NFG0QHB542HS2). 4. Evaluation of radiated noise. 5. Internal EMC assessment and response measures. 6. Signal integrity confirmation.

• Murata will achieve mass production of 2016 DFE2MCPHR33MJLLQ and DFE2MCPHR47MJLLQ metal power inductors Murata commercialized metal power inductors for automotive use, which are 2016 in size, have ultra-high industry standards for low DC resistance, support high current and high voltage resistance. Murata Manufacturing Co., Ltd. (hereinafter referred to as "Murata") has developed a new series of car mounted power inductors (1) "DFE2MCPH_JL (DFE2MCPHR33MJLLQ, DFE2MCPHR47MJLLQ) series" using wire wound metal alloys (hereinafter referred to as "this product"). It is a small car mounted power inductor with a size of 2016 (2.0x1.6mm), which not only achieves high voltage resistance of 40V, but also achieves industry ultra-high level (2) DC resistance and rated current. Mass production will begin in January 2024.

• What is the purpose of parasitic antenna couplers? Parasitic Element Coupling Device is a coupler that facilitates broadband and miniaturization of antenna characteristics. For antennas that require a wider frequency bandwidth, such as Wi Fi 6E, Wi Fi 7, and cellular networks, antenna miniaturization can be achieved through broadband and improved antenna efficiency. Parasitic antenna coupler is a coupler that can further broadband and improve antenna efficiency by strongly coupling the feeding antenna and parasitic elements (parasitic antenna) with this coupler. Therefore, even small antennas that are difficult to adapt to parasitic components can achieve good antenna characteristics by mounting this coupler. Murata achieved strong electromagnetic coupling without the use of magnetic materials by using our company's proprietary multi-layer technology to closely configure the transformer coils. Thus, this coupler was developed to improve antenna characteristics and contribute to miniaturization.

• Murata achieved mass production of 0603 (1608) 1uF 100V SMT ceramic capacitors (MLCC) The Murata Production Institute of Corporation has successfully developed a multi-layer ceramic capacitor "GRM188D72A105KE01" for 48V lines in base stations, servers, and data centers, and has been put into mass production. This product is available at 1608M (1.6 × 0.8mm) size and rated voltage of 100V can achieve 1 μ F's super large electrostatic capacity (according to Murata survey data as of November 20, 2023). GRM188D72A105KE01 (0603 1uF 100V X7R 10%) This model uses high-temperature resistant material X7T, with a temperature environment of -55 ℃~125 ℃, and a durability testing environment of (125 ℃ rated voltage * 150% 1000 hours)

• Noise reduction measures for PoC systems used in Murata automobiles and industrial equipment: full analysis of difficulties and strategies Murata PoC system noise reduction strategy for automobiles and industrial equipment: complete analysis of difficulties and strategies. The following aspects will be introduced: What is PoC? The circuits required for PoC, the impact of Bias-T circuits on SI, the impact of cables on SI, the impact of power noise on PoC systems, and examples of radiation noise countermeasures. Recommended Murata inductor: LQW series.

• LBCA1HN2EG is equipped with a new Bluetooth device specific IC for Onsemi IoT devices ® Introduction to the Low Energy module MURATA Murata Production Office: LBCA1HN2EG detailed introduction. Murata Production Co., Ltd. has developed Bluetooth ® The latest model of the Low Energy (LE) module, "Type 2EG," has been launched for mass production. The Type 2EG is equipped with Onsemi's RSL15 chipset that supports Bluetooth LE 5.2, achieving a high level of low power consumption in the industry. This product is also equipped with multiple certified functional modules such as Bluetooth LE SoC and RF front-end, making it easy to design IoT device systems and helping to shorten the time to product.

• Murata Studio and MobileKnowledge Company Initiate Cooperation to Expand the IoT UWB Market Murata Production Institute and MobileKnowledge Company have initiated cooperation to expand the IoT UWB market. Murata Manufacturing Co., Ltd. is a global leader in the design, manufacturing, and sales of ceramic based passive electronic components and solutions, communication modules, and power modules. Murata is committed to developing advanced electronic materials and leading multifunctional and high-density modules. The company has employees and manufacturing bases all over the world.